Shark Steam Mop Making Knocking Loud Noise[Fixes]

Keeping our homes clean and free from harmful germs is essential, and a convenient way to achieve this is by using a Shark Steam Mop.

These handy cleaning tools are known for their effectiveness in sanitizing various surfaces without the need for harsh chemicals.

However, some users might encounter an unexpected issue while using their Shark Steam Mop—the dreaded knocking noise. In this article, we will explore the common causes of this problem and provide practical solutions to troubleshoot and maintain your steam mop effectively.

Shark Steam Mop Making Knocking Noise Causes and Fixes

1. Loose Parts

Over time, due to regular use, transport, or storage, certain components within the steam mop may become loose, resulting in annoying knocking noises when the mop is in operation. These sounds can be quite bothersome and may disrupt your cleaning routine.

One of the reasons to become a loose part is that with repeated use, the constant movement and vibration can cause screws, bolts, or other fasteners to gradually loosen.

Also, if the steam mop is frequently moved from one location to another or stored in a way that subjects it to jostling or impacts, it can also contribute to the problem of loose parts.

Loose Parts Fix

To fix this problem, you need to carefully inspect your steam mop for any loose components, including the main body, handle, and attachments.

You can use the manufacturer’s manual for guidance and use the appropriate tools to securely tighten any identified loose parts.

After reassembling the mop, test it to ensure the knocking noise has been eliminated. If you maintain your steam mop and address loose parts promptly, you can enjoy uninterrupted and efficient cleaning performance.

2. Clogged Nozzles or Tubes:

If you use tap water, minerals that are present in that water will build up after steam mop for a week. That mineral will start to harden and eventually start to block tubes.

If your Shark steam mop is producing knocking noises during use, it’s possible that the issue is due to clogged nozzles or tubes. Blockages within these pathways can impede the smooth flow of steam from the water reservoir to the cleaning pad, leading to pressure buildup and subsequent knocking sounds.

Clogged Nozzles or Tubes Fix

You don’t need to be an expert to clean a mineral build-up in nozzles and tanks. Just follow the below steps carefully you will fix the knocking noise.

1. Power Off the Steam Mop: To start the process you need to ensure that the steam mop is turned off and disconnected from any power source to avoid any accidents while working on it.
2. Inspect Nozzles and Tubes: Examine the nozzles and tubes that are responsible for delivering steam from the water reservoir to the cleaning pad. Look for any visible signs of blockages such as debris, dirt, or mineral buildup.
3. Clear the Blockages: If you found any blockage, debris, or dirt you can use a small brush or a pipe cleaner to gently dislodge and remove any obstructions that might be hindering the steam flow. Be careful not to damage the delicate components while doing so.
4. Check Water Reservoir: You can also check the water reservoir for any debris or sediment that might have accumulated. If necessary, empty and rinse the reservoir to ensure there are no foreign particles inside. To clean a reservoir you can use natural cleaning solution like vinegar and water or any other steam mop cleaning liquid.
5. Test the Steam Mop: Once you’ve cleared the blockages and checked the water reservoir, reassemble the steam mop and perform a test run. Turn it on and observe if the knocking noise has been resolved. If not, double-check for any missed obstructions and repeat the process if needed.

By taking the time to clear any clogs in the nozzles or tubes, you can effectively eliminate the pressure buildup and knocking noises in your Shark steam mop. Regular maintenance and clearing of blockages will help ensure the smooth and efficient operation of your steam mop, allowing you to achieve optimal cleaning results on various surfaces without any disruptive noises.

3. Water Hammer Effect

Another possible cause of knocking or thumping sounds in your Shark steam mop is the water hammer effect.

This phenomenon occurs when you suddenly interrupt of the steam flow, such as when the mop is turned on or off abruptly.

When steam flow is abruptly stopped or started, it can create a rapid change in pressure within the steam delivery system, leading to the characteristic knocking noise.

Water Hammer Effect Fix

To fix this issue when turning the steam mop on or off, do so gently and gradually.

You need to Avoid any sudden, jerky actions that could cause rapid changes in steam flow.

if your steam mop has different steam settings or modes, allow a brief pause between switching from one mode to another.

By maintaining steady and smooth movements during cleaning, and handling the mop with care, you can minimize pressure fluctuations and prevent the water hammer effect, effectively eliminating the knocking sounds.

This approach not only ensures a more peaceful cleaning process but also contributes to the long-lasting performance of your Shark steam mop.

4. Malfunctioning Pump or Heater

If none of the above solutions fix your issue then probably your pump or heater is malfunctioning.

The internal pump is responsible for drawing water from the reservoir and delivering it to the heating element, where it is converted into steam.

If your steam mop has issues with the pump or heating elements can disrupt the steam flow, leading to irregular pressure and the production of knocking noises.

Malfunctioning Pump or Heater Fix

To address this more complex issue, the recommended solution is to Check the Pump and Heater.

However, as these components are internal and intricate, it is best to seek professional assistance.

If the knocking noise persists, it is advisable to contact Shark customer support or take the steam mop to an authorized service center for inspection and repair.

Trained technicians will be able to diagnose the problem accurately, and if necessary, perform the required repairs or replacements.

You can contact Shark’s support center at 1-855-427-5127 or visit their website at SharkClean customer support for further help.

Best Way To Prevent Shark Steam Noises In the Future

To prevent Shark steam mop noises in the future and ensure the longevity of your appliance, You need to follow these maintenance and usage tips:

• Regular cleaning and maintenance: Clean your steam mop thoroughly after each use. Follow the manufacturer’s instructions on how to clean and maintain the mop, including the mop head and steam nozzles. This helps prevent mineral buildup and debris that could lead to noise issues.
• Use distilled or filtered water: Hard water can leave mineral deposits in your steam mop, which may contribute to noises. Using distilled or filtered water can help minimize mineral buildup and keep the mop running smoothly.
• Check for wear and tear: Routinely inspect your steam mop for any signs of damage or wear. Replace any worn-out parts promptly to prevent them from causing noises or further damage.
• Proper storage: When not in use, store your steam mop in a clean and dry location. Avoid leaving water in the tank for extended periods when the mop is not in use.
• Avoid overheating: Pay attention to the steam mop’s operating time and don’t overuse it in one session. Giving the mop breaks and following the recommended usage guidelines can help prevent overheating and potential noise issues.
• Use on suitable surfaces: Only use your steam mop on surfaces recommended by the manufacturer. Using it on surfaces not suitable for steam cleaning could lead to unnecessary stress on the device and cause noises.
• Adjust steam settings: If your steam mop allows you to adjust steam settings, use the appropriate setting for the surface you are cleaning. This can help prevent strain on the mop’s components and reduce noise.
• Proper assembly: Ensure that all components are correctly assembled before using the steam mop. Loose or improperly fitted parts can lead to rattling or clattering sounds during operation.
• Follow manufacturer’s guidelines: Always follow the manufacturer’s instructions and guidelines for using and maintaining your Shark steam mop. This will help you avoid common pitfalls and keep your appliance in good working condition.

By following these tips and maintaining your Shark steam mop regularly, you can minimize the risk of noise and ensure optimal performance for a long time. If any issues do arise, refer to the manufacturer’s support or contact a professional for assistance.

FAQ: Shark Steam Mop Knocking Noise